Disciplined Advanced Scan Tool & Emissions Diagnosis - UT033

UT033 is a BAR-certified 16-hour smog technician update training seminar which is divided into two helpful sections:

A NEW WAY TO LEVERAGE SCAN TOOLS
The Scan Tool section was built using a completely different approach – to show the best PIDs, controls and other Scan Tool functions to use for each diagnosis. There are dozens of examples of this strategy in action, diagnosing the most common powertrain codes including:
  • P0171 & other Fuel Trim codes
  • EVAP leak and other functional failure codes
  • Misfire code isolation techniques
  • EGR functional and flow codes
  • O2 and Air/Fuel sensor codes
 
FAILED VEHICLE INSPECTION REPORTS 
Manufacturers don’t publish flow charts for ‘failed emissions test’. We’re left to test ‘everything’ in a linear diagnostic path that has no focus. To solve this problem, we’ve created a 1-page flow chart that divides all emissions failures into ‘Fuel Control Faults’ and ‘Emissions Control Faults’. It’s hard to ‘eyeball’ the difference until you consider Lambda or Air/Fuel ratio calculations, but the difference is critical to a quick solution.
 
What you’ll learn:
  • A very specific diagnostic strategy for OBD II Monitors and Diagnostic Trouble Codes
  • A 1-page flow chart that divides all emissions failures into ‘Fuel Control Faults’ and ‘Emissions Control Faults’
  • Strategies for finding the real fault using the high level indicator of Fuel Trim
  • Easy tests to further rule out subcategories within emission control systems
  • New information from BAR regarding overall program changes
 

Who Should Attend:

  • Currently licensed Smog Check technicians, complete the course to renew your license
  • A certificate will be issued to all students who pass the course

 

This is a not-for-credit course

As such, you will not earn units and the class will not be reflected on your banner schedule or on transcripts. As a not-for-credit course, Financial Aid cannot be used to pay for or offset the costs of this course.

 

 

​ 
Calendar.png
Dates & Time:
Saturday & Sunday
October 27 & 28, 2018
8:00 am - 5:00 pm
 
Cost.png
Cost:
$225 per person
 
Instructor.png
Instructor:
Donal Howell
Location.png
Location:
College of the Sequoias, Cedar Bldg., Room 422
915 S. Mooney Blvd.
Visalia, Ca​
 
Registration for Class:
Click here to register for this class.​
 
Click here for the Training Resource Center student cancellation and refund policy.
 
Questions.png
Questions?
Technical information regarding the training:
 
Other questions, please contact us at 559.688.3130 or trainingcenter@cos.edu
 
 
Last Updated: 9/19/2018 2:39 PM